Discover MakerZone

MATLAB and Simulink resources for Arduino, LEGO, and Raspberry Pi

Learn more

Discover what MATLAB® can do for your career.

Opportunities for recent engineering grads.

Apply Today

Thread Subject:
Canalyzer log file to mat file conversion

Subject: Canalyzer log file to mat file conversion

From: Simon Ryley

Date: 12 Dec, 2002 06:09:49

Message: 1 of 45

Hello all,


I use Canalyzer regularly to analyze automotive CAN Networks. To
display CAN plots more easily or load data into MATLAB/Simulink, I
frequently convert the CANalyzer log files to mat files using the
converter built into CANalyzer.


I now find myself with a batch of 40 plus log files to convert from
log to mat files. Does anyone know the format of log files to allow
me to write my own batch converter in MATLAB?


The CANalyzer converter is both slow and laborious to set up, and
does not seem to support batch conversions.


All help appreciated.


Simon

Subject: Canalyzer log file to mat file conversion

From: Eric Kampe

Date: 24 Dec, 2002 14:09:06

Message: 2 of 45

Simon Ryley wrote:
>
>
> Hello all,
>
> I use Canalyzer regularly to analyze automotive CAN Networks. To
> display CAN plots more easily or load data into MATLAB/Simulink, I
> frequently convert the CANalyzer log files to mat files using the
> converter built into CANalyzer.
>
> I now find myself with a batch of 40 plus log files to convert from
> log to mat files. Does anyone know the format of log files to allow
> me to write my own batch converter in MATLAB?
>
> The CANalyzer converter is both slow and laborious to set up, and
> does not seem to support batch conversions.
>
> All help appreciated.
>
> Simon
>


Hello Simon,


We don't currently have a method of converting a batch of log files
into another format. If you want to write your own batch converter,
it would be easiest to convert from the ASCII format. The ASCII
format should be easy enough to understand using a simple text editor.


   0.0002 1 A Rx d 1 D8
One line from an ASCII log file:
Time Stamp, CAN Channel #, Message ID (in hex), Rx for received (Tx
for transmit), 'd' for data, and finally the data in Hex.


I hope this helps. Feel free to contact us at Vector if you need
anything. I'll try and check this newsgroup when I get back from
break.


Happy Holidays,


Eric Kampe
Vector CANtech
248-449-9290
eric.kampe@vector-cantech.com

Subject: Canalyzer log file to mat file conversion

From: Simon Ryley

Date: 7 Jan, 2003 09:04:12

Message: 3 of 45

Eric,


Thanks for your post. I only just found it as the newsgroup didn't
send me an email when someone replies to the thread.


Unfortunately all the log files are in binary format. My analysis of
the files shows a header section, starting with "MDF", and including
a timestamp and date. The data section then starts with each line
havng a timestamp, (reading from LSB to MSB), CAN channel number, Rx
or Tx flag, the message ID, (again LSB first) four bytes of null
padding, then the data itself.


Am I correct so far?


Many thanks for the help,


Simon


Eric Kampe wrote:
>
>
> Simon Ryley wrote:
>>
>>
>> Hello all,
>>
>> I use Canalyzer regularly to analyze automotive CAN Networks.
To
>> display CAN plots more easily or load data into
MATLAB/Simulink, I
>> frequently convert the CANalyzer log files to mat files using
the
>> converter built into CANalyzer.
>>
>> I now find myself with a batch of 40 plus log files to convert
from
>> log to mat files. Does anyone know the format of log files to
allow
>> me to write my own batch converter in MATLAB?
>>
>> The CANalyzer converter is both slow and laborious to set up,
and
>> does not seem to support batch conversions.
>>
>> All help appreciated.
>>
>> Simon
>>
>
> Hello Simon,
>
> We don't currently have a method of converting a batch of log files
> into another format. If you want to write your own batch converter,
> it would be easiest to convert from the ASCII format. The ASCII
> format should be easy enough to understand using a simple text
editor.
>
> 0.0002 1 A Rx d 1 D8
> One line from an ASCII log file:
> Time Stamp, CAN Channel #, Message ID (in hex), Rx for received (Tx
> for transmit), 'd' for data, and finally the data in Hex.
>
> I hope this helps. Feel free to contact us at Vector if you need
> anything. I'll try and check this newsgroup when I get back from
> break.
>
> Happy Holidays,
>
> Eric Kampe
> Vector CANtech
> 248-449-9290
> eric.kampe@vector-cantech.com
>

Subject: Canalyzer log file to mat file conversion

From: Eric Kampe

Date: 7 Jan, 2003 09:53:47

Message: 4 of 45

Simon,


I haven't gotten a chance to work directally with the MDF format as
of yet, so I cannot verify your breakdown of the log file off hand.
However, I wouldn't want you to spend all the time necessary to
decode this file type by hand.


I have a formal description of the MDF file format, and a C library
with example code that should be what you need to get started reading
binary log files from CANoe or CANalyzer.


I'll forward these files to your email address, and they are
available to anyone else reading this thread that may be interested.


I hope this helps.
As always, questions/comments are welcome.


Eric Kampe
Vector CANtech
248-449-9290
eric.kampe@vector-cantech.com


Simon Ryley wrote:
>
>
> Eric,
>
> Thanks for your post. I only just found it as the newsgroup didn't
> send me an email when someone replies to the thread.
>
> Unfortunately all the log files are in binary format. My analysis
of
> the files shows a header section, starting with "MDF", and including
> a timestamp and date. The data section then starts with each line
> havng a timestamp, (reading from LSB to MSB), CAN channel number, Rx
> or Tx flag, the message ID, (again LSB first) four bytes of null
> padding, then the data itself.
>
> Am I correct so far?
>
> Many thanks for the help,
>
> Simon
>
> Eric Kampe wrote:
>>
>>
>> Simon Ryley wrote:
>>>
>>>
>>> Hello all,
>>>
>>> I use Canalyzer regularly to analyze automotive CAN
Networks.
> To
>>> display CAN plots more easily or load data into
> MATLAB/Simulink, I
>>> frequently convert the CANalyzer log files to mat files
using
> the
>>> converter built into CANalyzer.
>>>
>>> I now find myself with a batch of 40 plus log files to
convert
> from
>>> log to mat files. Does anyone know the format of log files
to
> allow
>>> me to write my own batch converter in MATLAB?
>>>
>>> The CANalyzer converter is both slow and laborious to set
up,
> and
>>> does not seem to support batch conversions.
>>>
>>> All help appreciated.
>>>
>>> Simon
>>>
>>
>> Hello Simon,
>>
>> We don't currently have a method of converting a batch of log
files
>> into another format. If you want to write your own batch
converter,
>> it would be easiest to convert from the ASCII format. The ASCII
>> format should be easy enough to understand using a simple text
> editor.
>>
>> 0.0002 1 A Rx d 1 D8
>> One line from an ASCII log file:
>> Time Stamp, CAN Channel #, Message ID (in hex), Rx for received
(Tx
>> for transmit), 'd' for data, and finally the data in Hex.
>>
>> I hope this helps. Feel free to contact us at Vector if you
need
>> anything. I'll try and check this newsgroup when I get back
from
>> break.
>>
>> Happy Holidays,
>>
>> Eric Kampe
>> Vector CANtech
>> 248-449-9290
>> eric.kampe@vector-cantech.com
>>
>

Subject: Canalyzer log file to mat file conversion

From: Prakash

Date: 26 Sep, 2011 12:49:28

Message: 5 of 45

Hi Eric/Simon,
I am doing something similar to Simon and would like to have the related documents for the same.Any help would be appreciated.

Thanks,
Prakash

"Eric Kampe" <eric.kampe@vector-cantech.com> wrote in message <eeb65f3.2@WebX.raydaftYaTP>...
> Simon,
>
>
> I haven't gotten a chance to work directally with the MDF format as
> of yet, so I cannot verify your breakdown of the log file off hand.
> However, I wouldn't want you to spend all the time necessary to
> decode this file type by hand.
>
>
> I have a formal description of the MDF file format, and a C library
> with example code that should be what you need to get started reading
> binary log files from CANoe or CANalyzer.
>
>
> I'll forward these files to your email address, and they are
> available to anyone else reading this thread that may be interested.
>
>
> I hope this helps.
> As always, questions/comments are welcome.
>
>
> Eric Kampe
> Vector CANtech
> 248-449-9290
> eric.kampe@vector-cantech.com
>
>
> Simon Ryley wrote:
> >
> >
> > Eric,
> >
> > Thanks for your post. I only just found it as the newsgroup didn't
> > send me an email when someone replies to the thread.
> >
> > Unfortunately all the log files are in binary format. My analysis
> of
> > the files shows a header section, starting with "MDF", and including
> > a timestamp and date. The data section then starts with each line
> > havng a timestamp, (reading from LSB to MSB), CAN channel number, Rx
> > or Tx flag, the message ID, (again LSB first) four bytes of null
> > padding, then the data itself.
> >
> > Am I correct so far?
> >
> > Many thanks for the help,
> >
> > Simon
> >
> > Eric Kampe wrote:
> >>
> >>
> >> Simon Ryley wrote:
> >>>
> >>>
> >>> Hello all,
> >>>
> >>> I use Canalyzer regularly to analyze automotive CAN
> Networks.
> > To
> >>> display CAN plots more easily or load data into
> > MATLAB/Simulink, I
> >>> frequently convert the CANalyzer log files to mat files
> using
> > the
> >>> converter built into CANalyzer.
> >>>
> >>> I now find myself with a batch of 40 plus log files to
> convert
> > from
> >>> log to mat files. Does anyone know the format of log files
> to
> > allow
> >>> me to write my own batch converter in MATLAB?
> >>>
> >>> The CANalyzer converter is both slow and laborious to set
> up,
> > and
> >>> does not seem to support batch conversions.
> >>>
> >>> All help appreciated.
> >>>
> >>> Simon
> >>>
> >>
> >> Hello Simon,
> >>
> >> We don't currently have a method of converting a batch of log
> files
> >> into another format. If you want to write your own batch
> converter,
> >> it would be easiest to convert from the ASCII format. The ASCII
> >> format should be easy enough to understand using a simple text
> > editor.
> >>
> >> 0.0002 1 A Rx d 1 D8
> >> One line from an ASCII log file:
> >> Time Stamp, CAN Channel #, Message ID (in hex), Rx for received
> (Tx
> >> for transmit), 'd' for data, and finally the data in Hex.
> >>
> >> I hope this helps. Feel free to contact us at Vector if you
> need
> >> anything. I'll try and check this newsgroup when I get back
> from
> >> break.
> >>
> >> Happy Holidays,
> >>
> >> Eric Kampe
> >> Vector CANtech
> >> 248-449-9290
> >> eric.kampe@vector-cantech.com
> >>
> >

Subject: Canalyzer log file to mat file conversion

From: Gérald HILD

Date: 19 Oct, 2011 09:12:23

Message: 6 of 45

Hi All,
Could you send me documents about mdf file and the C library please ?

Best regards

Gérald HILD
gerald.hild@vettiner.com

Subject: Canalyzer log file to mat file conversion

From: Gérald HILD

Date: 19 Oct, 2011 09:13:13

Message: 7 of 45

Hi All,
Could you send me documents about mdf file and the C library please ?

Best regards

Gérald HILD
gerald.hild@vettiner.com

Subject: Canalyzer log file to mat file conversion

From: Jooyoung

Date: 8 Nov, 2011 01:15:14

Message: 8 of 45

Dear Prakash,

I also suffer from similar problem with Simon. In my case, I have to convert over 3 hundred log files into mat file.

It will be very appreciate if you send me the related documents.

Thanks,
Jooyoung Ma

"Prakash " <prakashnarain@msn.com> wrote in message <j5psco$cnv$1@newscl01ah.mathworks.com>...
> Hi Eric/Simon,
> I am doing something similar to Simon and would like to have the related documents for the same.Any help would be appreciated.
>
> Thanks,
> Prakash
>
> "Eric Kampe" <eric.kampe@vector-cantech.com> wrote in message <eeb65f3.2@WebX.raydaftYaTP>...
> > Simon,
> >
> >
> > I haven't gotten a chance to work directally with the MDF format as
> > of yet, so I cannot verify your breakdown of the log file off hand.
> > However, I wouldn't want you to spend all the time necessary to
> > decode this file type by hand.
> >
> >
> > I have a formal description of the MDF file format, and a C library
> > with example code that should be what you need to get started reading
> > binary log files from CANoe or CANalyzer.
> >
> >
> > I'll forward these files to your email address, and they are
> > available to anyone else reading this thread that may be interested.
> >
> >
> > I hope this helps.
> > As always, questions/comments are welcome.
> >
> >
> > Eric Kampe
> > Vector CANtech
> > 248-449-9290
> > eric.kampe@vector-cantech.com
> >
> >
> > Simon Ryley wrote:
> > >
> > >
> > > Eric,
> > >
> > > Thanks for your post. I only just found it as the newsgroup didn't
> > > send me an email when someone replies to the thread.
> > >
> > > Unfortunately all the log files are in binary format. My analysis
> > of
> > > the files shows a header section, starting with "MDF", and including
> > > a timestamp and date. The data section then starts with each line
> > > havng a timestamp, (reading from LSB to MSB), CAN channel number, Rx
> > > or Tx flag, the message ID, (again LSB first) four bytes of null
> > > padding, then the data itself.
> > >
> > > Am I correct so far?
> > >
> > > Many thanks for the help,
> > >
> > > Simon
> > >
> > > Eric Kampe wrote:
> > >>
> > >>
> > >> Simon Ryley wrote:
> > >>>
> > >>>
> > >>> Hello all,
> > >>>
> > >>> I use Canalyzer regularly to analyze automotive CAN
> > Networks.
> > > To
> > >>> display CAN plots more easily or load data into
> > > MATLAB/Simulink, I
> > >>> frequently convert the CANalyzer log files to mat files
> > using
> > > the
> > >>> converter built into CANalyzer.
> > >>>
> > >>> I now find myself with a batch of 40 plus log files to
> > convert
> > > from
> > >>> log to mat files. Does anyone know the format of log files
> > to
> > > allow
> > >>> me to write my own batch converter in MATLAB?
> > >>>
> > >>> The CANalyzer converter is both slow and laborious to set
> > up,
> > > and
> > >>> does not seem to support batch conversions.
> > >>>
> > >>> All help appreciated.
> > >>>
> > >>> Simon
> > >>>
> > >>
> > >> Hello Simon,
> > >>
> > >> We don't currently have a method of converting a batch of log
> > files
> > >> into another format. If you want to write your own batch
> > converter,
> > >> it would be easiest to convert from the ASCII format. The ASCII
> > >> format should be easy enough to understand using a simple text
> > > editor.
> > >>
> > >> 0.0002 1 A Rx d 1 D8
> > >> One line from an ASCII log file:
> > >> Time Stamp, CAN Channel #, Message ID (in hex), Rx for received
> > (Tx
> > >> for transmit), 'd' for data, and finally the data in Hex.
> > >>
> > >> I hope this helps. Feel free to contact us at Vector if you
> > need
> > >> anything. I'll try and check this newsgroup when I get back
> > from
> > >> break.
> > >>
> > >> Happy Holidays,
> > >>
> > >> Eric Kampe
> > >> Vector CANtech
> > >> 248-449-9290
> > >> eric.kampe@vector-cantech.com
> > >>
> > >

Subject: Canalyzer log file to mat file conversion

From: Ty Sayman

Date: 29 Nov, 2011 22:16:38

Message: 9 of 45

On Nov 7, 8:15 pm, "Jooyoung " <jooyoung...@gmail.com> wrote:
> Dear Prakash,
>
> I also suffer from similar problem with Simon.  In my case, I have to convert over 3 hundred log files into mat file.
>
> It will be very appreciate if you send me the related documents.
>
> Thanks,
> Jooyoung Ma
>
>
>
>
>
>
>
> "Prakash " <prakashnar...@msn.com> wrote in message <j5psco$cn...@newscl01ah.mathworks.com>...
> > Hi Eric/Simon,
> > I am doing something similar to Simon and would like to have the related documents for the same.Any help would be appreciated.
>
> > Thanks,
> > Prakash
>
> > "Eric Kampe" <eric.ka...@vector-cantech.com> wrote in message <eeb65f...@WebX.raydaftYaTP>...
> > > Simon,
>
> > > I haven't gotten a chance to work directally with the MDF format as
> > > of yet, so I cannot verify your breakdown of the log file off hand.
> > > However, I wouldn't want you to spend all the time necessary to
> > > decode this file type by hand.
>
> > > I have a formal description of the MDF file format, and a C library
> > > with example code that should be what you need to get started reading
> > > binary log files from CANoe or CANalyzer.
>
> > > I'll forward these files to your email address, and they are
> > > available to anyone else reading this thread that may be interested.
>
> > > I hope this helps.
> > > As always, questions/comments are welcome.
>
> > > Eric Kampe
> > > Vector CANtech
> > > 248-449-9290
> > > eric.ka...@vector-cantech.com
>
> > > Simon Ryley wrote:
>
> > > > Eric,
>
> > > > Thanks for your post. I only just found it as the newsgroup didn't
> > > > send me an email when someone replies to the thread.
>
> > > > Unfortunately all the log files are in binary format. My analysis
> > > of
> > > > the files shows a header section, starting with "MDF", and including
> > > > a timestamp and date. The data section then starts with each line
> > > > havng a timestamp, (reading from LSB to MSB), CAN channel number, Rx
> > > > or Tx flag, the message ID, (again LSB first) four bytes of null
> > > > padding, then the data itself.
>
> > > > Am I correct so far?
>
> > > > Many thanks for the help,
>
> > > > Simon
>
> > > > Eric Kampe wrote:
>
> > > >> Simon Ryley wrote:
>
> > > >>> Hello all,
>
> > > >>> I use Canalyzer regularly to analyze automotive CAN
> > > Networks.
> > > > To
> > > >>> display CAN plots more easily or load data into
> > > > MATLAB/Simulink, I
> > > >>> frequently convert the CANalyzer log files to mat files
> > > using
> > > > the
> > > >>> converter built into CANalyzer.
>
> > > >>> I now find myself with a batch of 40 plus log files to
> > > convert
> > > > from
> > > >>> log to mat files. Does anyone know the format of log files
> > > to
> > > > allow
> > > >>> me to write my own batch converter in MATLAB?
>
> > > >>> The CANalyzer converter is both slow and laborious to set
> > > up,
> > > > and
> > > >>> does not seem to support batch conversions.
>
> > > >>> All help appreciated.
>
> > > >>> Simon
>
> > > >> Hello Simon,
>
> > > >> We don't currently have a method of converting a batch of log
> > > files
> > > >> into another format. If you want to write your own batch
> > > converter,
> > > >> it would be easiest to convert from the ASCII format. The ASCII
> > > >> format should be easy enough to understand using a simple text
> > > > editor.
>
> > > >> 0.0002 1 A Rx d 1 D8
> > > >> One line from an ASCII log file:
> > > >> Time Stamp, CAN Channel #, Message ID (in hex), Rx for received
> > > (Tx
> > > >> for transmit), 'd' for data, and finally the data in Hex.
>
> > > >> I hope this helps. Feel free to contact us at Vector if you
> > > need
> > > >> anything. I'll try and check this newsgroup when I get back
> > > from
> > > >> break.
>
> > > >> Happy Holidays,
>
> > > >> Eric Kampe
> > > >> Vector CANtech
> > > >> 248-449-9290
> > > >> eric.ka...@vector-cantech.com

And I do too!
Would it be possible for me to get these documents?

Subject: Canalyzer log file to mat file conversion

From: ASL Bravo

Date: 17 Jan, 2012 16:09:09

Message: 10 of 45


hi.

Can anyone please send me <engr_uk@live.co.uk> the script as well. I need to convert handfull of CAN logs in ASCII to mat files for simulation.

thanks in advance.
 

Subject: Canalyzer log file to mat file conversion

From: Reid

Date: 6 Mar, 2012 14:20:13

Message: 11 of 45

I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.


Reid Steiger

Ford Research & Advanced Engineering Europe
Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Cavelan

Date: 18 Apr, 2012 08:03:18

Message: 12 of 45

Hi I would be happy if I could get the scripts too. kristoffertagesson@gmail.com

"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Jiang Xin

Date: 19 May, 2012 14:59:27

Message: 13 of 45

Reid,
     I would be of great help if you can kindly share me the scripts you created, I'm working on importing .blf file into matlab workspace. Thank you.
    xingxing993@gmail.com


"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Deepak

Date: 25 May, 2012 10:50:12

Message: 14 of 45

Hi Mr. Reid,

Greetings!

It would be og great help of you can share the scripts you created related to subject. I also have the hundreds of log files which i need to convert into mat file.

Look forward to your support and response.

Thanks & Regards,
Deepak Panwar
"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Deepak

Date: 25 May, 2012 10:55:07

Message: 15 of 45

Hi Mr. Jiang,
     I'm aslo working on the same i.e importing .blf into matlab workspace. Therefore request you to kindly share the scripts, I would be of great help.

Thanks & Regards,
Deepak Panwar
deepak.panwar@maruti.co.in
chobarla@gmail.com

"Jiang Xin" <xingxing993@gmail.com> wrote in message <jp8cgf$bga$1@newscl01ah.mathworks.com>...
> Reid,
> I would be of great help if you can kindly share me the scripts you created, I'm working on importing .blf file into matlab workspace. Thank you.
> xingxing993@gmail.com
>
>
> "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
> >
> >
> > Reid Steiger
> >
> > Ford Research & Advanced Engineering Europe
> > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> > E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Seth

Date: 5 Jul, 2012 19:29:15

Message: 16 of 45

Reid,

I would greaty benefit from those scripts if you don't mind sharing...

Thanks,
Seth
matthew_placke@lord.com



"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Sami

Date: 24 Jul, 2012 19:29:15

Message: 17 of 45

Hi Reid,

Would you mind sharing the scripts that you did ?

Regards,
Sami Oweis.
seweis@oakland.edu


"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Travis Orvedahl

Date: 7 Aug, 2012 18:19:16

Message: 18 of 45

Similar to everyone else in the post, I am looking for additional information on the BLF and the CLF file types that the Vector Data Logger (GL1000 and GL3000) store the data in. I already have scripts to parse the data once extracted to ASCII files, but the ASC files tend to be very large, making it time consuming to transfer to/from test sites or network share locations.

Does anybody have information on the CLF file type or the BLF file type and how the data is stored, and can be extracted in MATLAB?

Best Regards

Subject: Canalyzer log file to mat file conversion

From: Benjamin

Date: 29 Oct, 2012 20:19:08

Message: 19 of 45

Hi Reid,

I would really appreciate if you could share the scripts with me.

redabra@gmail.com


"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Daniel

Date: 30 Oct, 2012 17:30:08

Message: 20 of 45

Hi Reid,

As with all the other messages contained on the page I would really appreciate if you could share the scripts with me.

Regards

Dan


"Benjamin" wrote in message <k6mobs$77b$1@newscl01ah.mathworks.com>...
> Hi Reid,
>
> I would really appreciate if you could share the scripts with me.
>
> redabra@gmail.com
>
>
> "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
> >
> >
> > Reid Steiger
> >
> > Ford Research & Advanced Engineering Europe
> > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> > E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Daniel

Date: 30 Oct, 2012 17:33:08

Message: 21 of 45

Hi Reid,

As with the other posts on this thread I would appreciate if you could share the .asc to .mat file conversion scripts.

Regards

Dan


"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Luc

Date: 27 Nov, 2012 08:56:06

Message: 22 of 45

Has anyone gotten the script from Reid?

please share with the community.
Thanks.

> > Reid Steiger
> >
> > Ford Research & Advanced Engineering Europe
> > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> > E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Rimpy

Date: 2 Feb, 2013 07:34:08

Message: 23 of 45

Dear Eric,
 Greetings!!
It would of great help if you could kindly send me the script for reading the blf files. In addition,I have no idea regardinfg the structure of the CAN .blf files.
Looking forward to your kind help and support.

Hope to hear from you soon.


Thanks & Regards,
Rimpy SarKar


"Simon Ryley" <simon.ryley@jatcouk.com> wrote in message <eeb65f3.-1@WebX.raydaftYaTP>...
> Hello all,
>
>
> I use Canalyzer regularly to analyze automotive CAN Networks. To
> display CAN plots more easily or load data into MATLAB/Simulink, I
> frequently convert the CANalyzer log files to mat files using the
> converter built into CANalyzer.
>
>
> I now find myself with a batch of 40 plus log files to convert from
> log to mat files. Does anyone know the format of log files to allow
> me to write my own batch converter in MATLAB?
>
>
> The CANalyzer converter is both slow and laborious to set up, and
> does not seem to support batch conversions.
>
>
> All help appreciated.
>
>
> Simon

Subject: Canalyzer log file to mat file conversion

From: Jaremy

Date: 4 Feb, 2013 17:31:08

Message: 24 of 45

Hello all,

I wanted to add that our Vehicle Network Toolbox product includes functions that allow import of Vector ASCII log files into MATLAB. VNT is a CAN connectivity toolbox with MATLAB functions, Simulink blocks, and a GUI message tool. Take a look at the product page for more information:

http://www.mathworks.com/products/vehicle-network/

Thanks!

Subject: Canalyzer log file to mat file conversion

From: Siddhi Imming

Date: 14 Feb, 2013 11:40:17

Message: 25 of 45

Hi Reid Steiger,

Is it possible to share the script whit me?

Siddhi Imming


"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Yadunandan

Date: 13 Mar, 2013 23:27:06

Message: 26 of 45

"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Hello Ried,
I'd be really glad and thankful to you if you could please share you script files to me at nandu012@hotmail.com.

It would really help me in my data analysis. Right now, I made a script file, but it could read only one CAN message per asc or blf. That means, every time when I log the data, I have to filter out the CAN message I want to analyze and then use it. It really consuming lot of time.

Subject: Canalyzer log file to mat file conversion

From: cristina Villegas

Date: 19 Mar, 2013 09:27:06

Message: 27 of 45

Hi Reid, it would be great if you could share your scripts
cristina.villegas@gmail.com

Thanks a lot!
Cristina

"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: Reid

Date: 19 Mar, 2013 11:23:06

Message: 28 of 45

UPDATE
Now works for 32-bit or 64-bit Matlab

I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.

Reid Steiger

Ford Research & Advanced Engineering Europe
Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Reid

Date: 19 Mar, 2013 11:25:07

Message: 29 of 45

see my contact details below.
"cristina Villegas" wrote in message <ki9b1a$r4t$1@newscl01ah.mathworks.com>...
> Hi Reid, it would be great if you could share your scripts
> cristina.villegas@gmail.com
>
> Thanks a lot!
> Cristina
>
> "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
> >
> >
> > Reid Steiger
> >
> > Ford Research & Advanced Engineering Europe
> > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> > E-mail: rsteige3@ford.com

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: Siddhi Imming

Date: 21 Mar, 2013 14:13:05

Message: 30 of 45

"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
> UPDATE
> Now works for 32-bit or 64-bit Matlab
>
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Hi Reid,

Can you send me the MATLAB scripts that converts Vector CANalyzer (asc or blf) files to MATLAB data structures? Thanks in advance.
siddhi@versatel.nl

Rind regards,
Siddhi Imming

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: Jerry Ryu

Date: 25 Mar, 2013 23:34:11

Message: 31 of 45

Hi Reid,

Would you kindly share me the script(.blf to .mat).
I'll be really grateful.

Thanks,
Jerry,

"Siddhi Imming" wrote in message <kif4hh$35v$1@newscl01ah.mathworks.com>...
> "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
> > UPDATE
> > Now works for 32-bit or 64-bit Matlab
> >
> > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
> >
> > Reid Steiger
> >
> > Ford Research & Advanced Engineering Europe
> > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> > E-mail: rsteige3@ford.com
>
> Hi Reid,
>
> Can you send me the MATLAB scripts that converts Vector CANalyzer (asc or blf) files to MATLAB data structures? Thanks in advance.
> siddhi@versatel.nl
>
> Rind regards,
> Siddhi Imming

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: Jerry Ryu

Date: 26 Mar, 2013 00:14:20

Message: 32 of 45

Sorry I forgot addressing. pppdrive@gmail.com


"Jerry Ryu" wrote in message <kiqmtj$nmh$1@newscl01ah.mathworks.com>...
> Hi Reid,
>
> Would you kindly share me the script(.blf to .mat).
> I'll be really grateful.
>
> Thanks,
> Jerry,
>
> "Siddhi Imming" wrote in message <kif4hh$35v$1@newscl01ah.mathworks.com>...
> > "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
> > > UPDATE
> > > Now works for 32-bit or 64-bit Matlab
> > >
> > > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
> > >
> > > Reid Steiger
> > >
> > > Ford Research & Advanced Engineering Europe
> > > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> > > E-mail: rsteige3@ford.com
> >
> > Hi Reid,
> >
> > Can you send me the MATLAB scripts that converts Vector CANalyzer (asc or blf) files to MATLAB data structures? Thanks in advance.
> > siddhi@versatel.nl
> >
> > Rind regards,
> > Siddhi Imming

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: Antti

Date: 10 Apr, 2013 07:08:06

Message: 33 of 45

Hi Reid,

Considering the amount of interest, could you consider sharing your files on the File Exchange so people could just download your files and see if they work for them?

Br,
Antti

"Jerry Ryu" wrote in message <kiqp8s$6l$1@newscl01ah.mathworks.com>...
> Sorry I forgot addressing. pppdrive@gmail.com
>
>
> "Jerry Ryu" wrote in message <kiqmtj$nmh$1@newscl01ah.mathworks.com>...
> > Hi Reid,
> >
> > Would you kindly share me the script(.blf to .mat).
> > I'll be really grateful.
> >
> > Thanks,
> > Jerry,
> >
> > "Siddhi Imming" wrote in message <kif4hh$35v$1@newscl01ah.mathworks.com>...
> > > "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
> > > > UPDATE
> > > > Now works for 32-bit or 64-bit Matlab
> > > >
> > > > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
> > > >
> > > > Reid Steiger
> > > >
> > > > Ford Research & Advanced Engineering Europe
> > > > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> > > > E-mail: rsteige3@ford.com
> > >
> > > Hi Reid,
> > >
> > > Can you send me the MATLAB scripts that converts Vector CANalyzer (asc or blf) files to MATLAB data structures? Thanks in advance.
> > > siddhi@versatel.nl
> > >
> > > Rind regards,
> > > Siddhi Imming

Subject: Canalyzer log file to mat file conversion

From: Niklas

Date: 18 Jun, 2013 14:11:09

Message: 34 of 45

"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Hi Reid,

I'm in the same situation. Need to convert CANalyzer log files into .mat files. Would you like to share these scripts with me?

Email: niklas.walthersson@gmail.com

Thanks in advance!

BR

Niklas

Subject: Canalyzer log file to mat file conversion

From: Davide

Date: 28 Jun, 2013 07:45:04

Message: 35 of 45

"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Hi Reid,
I work with canalyzer and I have a lot of *.asc data to convert in *.mat format, would you share with me your scripts?
Thank you in advance,

Davide Marsili

Subject: Canalyzer log file to mat file conversion

From: Bennett

Date: 22 Oct, 2013 05:58:06

Message: 36 of 45

Hello Reid,

It would be of great help if you can kindly share me the scripts which you have created for converting .blf file into .mat .
Please mail me as soon as possible :)

Thanks & Regards,
Bennett


"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <jj56et$lcq$1@newscl01ah.mathworks.com>...
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: Gordon Kennedy

Date: 12 Dec, 2013 09:01:13

Message: 37 of 45

Please could you send me a copy of your scripts too ?

Thanks in advance,
gordon.kennedy@gb.mahle.com

"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
> UPDATE
> Now works for 32-bit or 64-bit Matlab
>
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file to mat file conversion

From: Gordon Kennedy

Date: 12 Dec, 2013 09:20:21

Message: 38 of 45

Hi Eric,
Please could I have a copy of the blf file format too ?
Thanks in advance,
gordon.kennedy@gb.mahle.com

"Eric Kampe" <eric.kampe@vector-cantech.com> wrote in message <eeb65f3.2@WebX.raydaftYaTP>...
> Simon,
> I haven't gotten a chance to work directally with the MDF format as
> of yet, so I cannot verify your breakdown of the log file off hand.
> However, I wouldn't want you to spend all the time necessary to
> decode this file type by hand.
>
> I have a formal description of the MDF file format, and a C library
> with example code that should be what you need to get started reading
> binary log files from CANoe or CANalyzer.
>
> I'll forward these files to your email address, and they are
> available to anyone else reading this thread that may be interested.
>
> I hope this helps.
> As always, questions/comments are welcome.
>
> Eric Kampe
> Vector CANtech
> 248-449-9290
> eric.kampe@vector-cantech.com

Subject: Canalyzer log file to mat file conversion

From: pietro

Date: 22 Feb, 2014 14:27:11

Message: 39 of 45

"Gordon Kennedy" wrote in message <l8bv4l$8e$1@newscl01ah.mathworks.com>...
> Hi Eric,
> Please could I have a copy of the blf file format too ?
> Thanks in advance,
> gordon.kennedy@gb.mahle.com
>
> "Eric Kampe" <eric.kampe@vector-cantech.com> wrote in message <eeb65f3.2@WebX.raydaftYaTP>...
> > Simon,
> > I haven't gotten a chance to work directally with the MDF format as
> > of yet, so I cannot verify your breakdown of the log file off hand.
> > However, I wouldn't want you to spend all the time necessary to
> > decode this file type by hand.
> >
> > I have a formal description of the MDF file format, and a C library
> > with example code that should be what you need to get started reading
> > binary log files from CANoe or CANalyzer.
> >
> > I'll forward these files to your email address, and they are
> > available to anyone else reading this thread that may be interested.
> >
> > I hope this helps.
> > As always, questions/comments are welcome.
> >
> > Eric Kampe
> > Vector CANtech
> > 248-449-9290
> > eric.kampe@vector-cantech.com

Has anyone got the matlab script from Reid? In case could anyone share it with me, please?
here my email: bracardi82@email.it

Thanks

Cheers

Subject: Canalyzer log file to mat file conversion

From: Sai Sunil

Date: 3 May, 2014 03:41:11

Message: 40 of 45

Hello Reid,

I was looking for the conversion file too. Could you please share the conversion scripts with me too.
email: saisunilchg@gmail.com

Many Thanks,
Sai Sunil

Subject: Canalyzer log file to mat file conversion

From: Giulio

Date: 26 May, 2014 09:05:08

Message: 41 of 45

Good afternoon,

I was looking for the conversion scripts, as I have to convert ~400 Mb of log files into .mat files..

Can anyone please send/share the scritpts? It would be much appreciated.

Thank you very much,

Giulio

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: Schro

Date: 11 Jun, 2014 14:16:13

Message: 42 of 45

Hi all,


as all the other guys, I'm in a similiar situation and have to convert blf to mat.
Could you please share the script?

Thanks in advance
Phil
schroe@sags-per-mail.de


"Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
> UPDATE
> Now works for 32-bit or 64-bit Matlab
>
> I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
> Reid Steiger
>
> Ford Research & Advanced Engineering Europe
> Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Köln, Germany
> E-mail: rsteige3@ford.com

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: maximilian1.meissner@gmail.com

Date: 6 Jul, 2014 10:07:07

Message: 43 of 45

Am Mittwoch, 11. Juni 2014 16:16:13 UTC+2 schrieb Schro :
> Hi all,
>
>
>
>
>
> as all the other guys, I'm in a similiar situation and have to convert blf to mat.
>
> Could you please share the script?
>
>
>
> Thanks in advance
>
> Phil
>
> schroe@sags-per-mail.de
>
>
>
>
>
> "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
>
> > UPDATE
>
> > Now works for 32-bit or 64-bit Matlab
>
> >
>
> > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
> >
>
> > Reid Steiger
>
> >
>
> > Ford Research & Advanced Engineering Europe
>
> > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Kln, Germany
>
> > E-mail: rsteige3@ford.com

Hi,

i have the same Problem, can someone send me the script?

maxme@web.de

Thanks,
Max

Subject: Canalyzer log file (blf or asc) to mat file conversion

From: sgakeen@gmail.com

Date: 19 Aug, 2014 12:40:08

Message: 44 of 45

On Sunday, 6 July 2014 12:07:07 UTC+2, maximilian...@gmail.com wrote:
> Am Mittwoch, 11. Juni 2014 16:16:13 UTC+2 schrieb Schro :
>
> > Hi all,
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > as all the other guys, I'm in a similiar situation and have to convert blf to mat.
>
> >
>
> > Could you please share the script?
>
> >
>
> >
>
> >
>
> > Thanks in advance
>
> >
>
> > Phil
>
> >
>
> > schroe@sags-per-mail.de
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > "Reid " <Reid.Steiger@sbcglobal.net> wrote in message <ki9hqq$fgj$1@newscl01ah.mathworks.com>...
>
> >
>
> > > UPDATE
>
> >
>
> > > Now works for 32-bit or 64-bit Matlab
>
> >
>
> > >
>
> >
>
> > > I created a set of matlab scripts that converts Vector CANalyzer (asc or blf) files to Matlab data structures.
>
> >
>
> > >
>
> >
>
> > > Reid Steiger
>
> >
>
> > >
>
> >
>
> > > Ford Research & Advanced Engineering Europe
>
> >
>
> > > Ford Werke GmbH, D-MF/1048, Spessartstrasse, D-50725 Kln, Germany
>
> >
>
> > > E-mail: rsteige3@ford.com
>
>
>
> Hi,
>
>
>
> i have the same Problem, can someone send me the script?
>
>
>
> maxme@web.de
>
>
>
> Thanks,
>
> Max

Hello everyone,

I also have the same issue, could someone forward me the scripts? sgakeen@gmail.com

thank you in advance,

Regards,

Steve

Subject: Canalyzer log file to mat file conversion

From: sgakeen@gmail.com

Date: 19 Aug, 2014 12:59:20

Message: 45 of 45

Hello everyone,

Just re-posting to remove the former emails, could someone also forward me the conversion scripts? sgakeen@gmail.com

thank you very much in advance,

Steve

Tags for this Thread

What are tags?

A tag is like a keyword or category label associated with each thread. Tags make it easier for you to find threads of interest.

Anyone can tag a thread. Tags are public and visible to everyone.

Contact us