Discretize input at specified interval
The Quantizer block passes its input signal through a stair-step function so that many neighboring points on the input axis are mapped to one point on the output axis. The effect is to quantize a smooth signal into a stair-step output. The output is computed using the round-to-nearest method, which produces an output that is symmetric about zero.
y = q * round(u/q)
where y is the output, u the input, and q the Quantization interval parameter.
The Quantizer block accepts and outputs real or complex signals of type single or double. For more information, see Data Types Supported by Simulink in the Simulink® documentation.
The interval around which the output is quantized. Permissible output values for the Quantizer block are n*q, where n is an integer and q the Quantization interval. The default is 0.5.
Simulink software by default treats the Quantizer block as unity gain when linearizing. This setting corresponds to the large-signal linearization case. If you clear this check box, the linearization routines assume the small-signal case and set the gain to zero.
Specify the sample time of this Outport block. See Specify Sample Time in the online documentation for information on specifying sample times. The output of this block changes at the specified rate to reflect the value of its input.
The Quantizer block appears in the Boiler Plant model/digital thermometer/ADC subsystem.
The ADC subsystem digitizes the input analog voltage by:
Multiplying the analog voltage by 256/5 with the Gain block
Rounding the value to integer floor with the Quantizer block
Limiting the output to a maximum of 255 (the largest unsigned 8-bit integer value) with the Saturation block
For more information, see Explore the Fixed-Point "Bang-Bang Control" Model in the Stateflow® documentation.