System object: phased.ConformalArray
Output responses of array elements
RESP = step(H,FREQ,ANG)
Note: The object performs an initialization the first time the step method is executed. This initialization locks nontunable properties and input specifications, such as dimensions, complexity, and data type of the input data. If you change a nontunable property or an input specification, the System object™ issues an error. To change nontunable properties or inputs, you must first call the release method to unlock the object.
Operating frequencies of array in hertz. FREQ is a row vector of length L. Typical values are within the range specified by a property of H.Element. That property is named FrequencyRange or FrequencyVector, depending on the type of element in the array. The element has zero response at frequencies outside that range.
Directions in degrees. ANG can be either a 2-by-M matrix or a row vector of length M.
If ANG is a 2-by-M matrix, each column of the matrix specifies the direction in the form [azimuth; elevation]. The azimuth angle must be between –180 and 180 degrees, inclusive. The elevation angle must be between –90 and 90 degrees, inclusive.
If ANG is a row vector of length M, each element specifies a direction's azimuth angle. In this case, the corresponding elevation angle is assumed to be 0.
Voltage responses of the phased array. The output depends on whether the array supports polarization or not.
Construct an 8-element uniform circular array (UCA). Assume the operating frequency is 1 GHz. Find the response of each element in this array in the direction of 30 degrees azimuth and 5 degrees elevation.
ha = phased.ConformalArray; N = 8; azang = (0:N-1)*360/N-180; ha.ElementPosition = [cosd(azang);sind(azang);zeros(1,N)]; ha.ElementNormal = [azang;zeros(1,N)]; fc = 1e9; ang = [30;5]; resp = step(ha,fc,ang);
resp = 1 1 1 1 1 1 1 1